BRONYA ANTICOR


Liquid thermal insulation BRONYA ANTIRUST

  • Directly onto rust!
  • Rust converter / corrosion protection without preparation
  • Non flammable
  • Diffusion-tight
  • Thermal insulation (Imm 80mm)
  • Operating temperature -600 C to +1500 C
  • Non-toxic, UV-, salt- and acid-resistant
  • Decrease or completely eliminate condensed water formation on cold water pipelines and air ducts; isolate equipment without process shutdown;

UNIQUE HEAT-INSULATING MATERIAL WHICH CAN BE APPLIED DIRECTLY ON A RUSTY SURFACE.

  • Liquid thermal insulation Bronya Antirust This is the first and unique material developed in Russia which can be applied directly onto the rusted surface. It is enough to just remove loose rust with a wire brush and right after that thermal insulation Bronya Anrirust can be applied following its application guide. Extrafine thermal insulation Bronya Antirust is a special compound with improved adhesion and rustpreventing characteristics. It is resistant to UV light and chemicals (salt solutions, acids, alkali, some types of oil products). The coat increases the service life of isolated surfaces and protects against corrosion.
  • Extra-fine thermal insulation Bronya Facade is an extra-fine liquid ceramic thermal insulating material which can be applied by 1 to 3mm layers at a time (which depends on application type) and which has vapor permeability of a high-quality facade paint (0.03). Bronya Facade is a weather-resistant high-viscous compound specially developed for thermal insulation of vertical surfaces. The coat applied inside and outside of a wall forms single jointless surface and preserves heat all over the room what has a positive effect on microclimate.
  • Extra-fine liquid insulation Bronya Antirust is used for thermal insulation of construction steel structures, metalware, pipelines, various industrial equipment exposed to high humidity or hostile environment
  • this coat is a base for application of other modifications.
  • cut repair costs in case of emergencies by reducing time spent for leak search and old isolation removal; prevent metal surfaces from thermal distortion.
Operating temperature is from -60°С to +150°С. When Bronya Antirust is used for thermal insulation of in-service structures and pipelines, it significantly decreases labor costs as it does not require special preparation of the working surface. For cost reasons, Bronya Antirust can be applied as a first layer and classic thermal insulation Bronya for further layers.